How to Change Dodge Journey Battery
Changing the battery in your Dodge Journey is a task that most car owners can handle themselves, provided they have the right tools and follow the correct steps. A dead battery can be a frustrating experience, but with a bit of preparation and a few simple instructions, you can replace it in no time. In this article, we will guide you through the process of how to change the Dodge Journey battery, ensuring that your vehicle is back on the road in no time.
Before beginning the battery replacement process, it is essential to gather all the necessary tools and materials. You will need a socket set with a 10mm socket, a ratchet, a jack, jack stands, gloves, and eye protection. Additionally, it’s a good idea to have a new battery on hand, as you’ll need it to complete the job.
Step 1: Park the Vehicle on a Flat Surface
First, locate a flat, level surface to park your Dodge Journey. Engage the parking brake and place the vehicle in park. This ensures that the car won’t roll while you’re working on the battery.
Step 2: Secure the Vehicle with Jack Stands
Using the jack, lift the vehicle at the designated jack points, which are usually located near the front or rear wheels. Once the car is elevated, place the jack stands under the vehicle to secure it. Never rely solely on the jack alone to support the car’s weight.
Step 3: Disconnect the Battery Terminals
Locate the battery under the hood of your Dodge Journey. The battery is typically located on the driver’s side. Using the socket set, disconnect the negative terminal first, followed by the positive terminal. This order is crucial to prevent sparks and potential damage to the electrical system.
Step 4: Remove the Battery
With the terminals disconnected, carefully remove the battery from its mount. Take note of the orientation of the battery as you remove it, so you can reinstall it in the same position. Place the old battery on a flat surface to prevent it from rolling away.
Step 5: Install the New Battery
Position the new battery in the same orientation as the old one and place it in the mount. Make sure it is securely in place. Reconnect the positive terminal first, followed by the negative terminal. Take care to ensure that the terminals are properly seated to avoid corrosion.
Step 6: Clean the Battery Terminals
Using a wire brush or battery cleaner, clean the battery terminals to remove any corrosion. This will help ensure a good electrical connection and prevent future issues.
Step 7: Lower the Vehicle and Dispose of the Old Battery
Remove the jack stands and lower the vehicle to the ground. Once the car is safely on the ground, dispose of the old battery at a recycling center or an authorized battery retailer.
And there you have it! You have successfully changed the battery in your Dodge Journey. With these simple steps, you can save time and money by doing the job yourself. Just remember to take your time and be cautious when handling the battery and its terminals.
